I was flying Raptor, now i moved to 600N. It is a fast and nice 600n basic. I am new to the CCPM. I am using XP9303, please help for set up and check for interaction.
I just made a simple level that I can attach to the swash as it moves. I just trim everything so that the bubbles in either direction do not move as I move through the collective range. Then I move elevator and make sure the aileron bubble stays put and vice versa for the elevator when moving the aileron.
I use plates in place of blades just for convenience and the yellow rubber boots off the vise make a great holder on the grips.
08-11-2007 Over year old.
afeitang Heliman Location: Hawaii
Tahnk you all.
08-14-2007 Over year old.
Johnno Senior Heliman Location: Southern Illinois
I just put a cyclock on my Rex, combined with my laptop its a brainless procedure, and zero interaction from top to bottom and a built in electronic cyclic ring.
I have seen Johnno's cyclock in action and it is sweet! It sure makes things simple.
08-15-2007 Over year old.
afeitang Heliman Location: Hawaii
Where can i buy cyclock? How does it work?
08-15-2007 Over year old.
702nitro Key Veteran Location: Las Vegas, NV
Doesn't this device require that both the surface and heli be dead on balls accurate for this leveling tool to work?
Vibe Fiddy Atom 111110100 Trex 1001011000n
08-16-2007 Over year old.
tim deakin Veteran Location: gloucestershire uk
What is interaction? I'm setting up a Sylphide at the moment with 120deg eccpm,when I move the elevator quickly back and forth the whole swash plate moves up and down on the main shaft and then levels off.Is this interaction?
09-08-2007 Over year old.
inkspot1967 rrProfessor Location: cranston ri.
you can easily tell if you have interaction by just moving full collective up and full down slowly and look at the paddles there should be no movement of the paddles
then on ail put collective full pos pitch then move ail full left and right slowly and look at the ball on the swash it should not move at all. then check at full neg pitch and do the same above
do same on elev.
Trex700e Ray Nemovi's kit & Tyler Bonta Head Rave Flybarless WENZEL CANOPY Team TomTom
09-09-2007 Over year old.
rapirex Heliman Location: france
hy im a french and i whant now if in the XP9303 programe whe can change trotle and gaz mixe because i pilote to the mode 1 and in my shop are in mode 2 thank you
