RunRyder - end points and swashplate??

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 698 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

259 views

POST REPLY

Ace Hobby	.	Esprit Model	.	Thunder Power RC
	.		.

Align T-REX 600N 700N > end points and swashplate??

brifa
Senior Heliman
Location: ITALY

Dear all
i'd like to know wich value i have to set on my futaba 7cp for channel 4 (rudder) end point
somebody told me to set it at max value (140)

and i noted that when i give full pitch the hely doesn't go up levelled
i should level the swashplate but in which way??
thanks

08-10-2007 Over year old.

702nitro
Key Veteran
Location: Las Vegas, NV

Rudder end points control the pirouette speed. You can start off with 100 on both ends and adjust accordingly(lower value = slower higher= faster)

Vibe Fiddy
Atom 111110100
Trex 1001011000n

08-10-2007 Over year old.

hampilot
Senior Heliman
Location: Reno, NV, USA

end of my point

I was always under the impression that you would adjust your end points to full travel of the rudder itself, depending on the gyro and if it has a travel setting, in which case you would set your end points on ch 4 to 100 and adjust your travel in the gyro.

as far as the swash being level, it should be. get a swash leveler, it makes things so much easier.
[url=http://truebloodengineering.com/modules.php?name=Content&pa=showpage&pid=1]

08-10-2007 Over year old.

kingair
Key Veteran
Location: Utah - USA

With a swash leveler you can check for interaction at the extreme ends of throw. I think the trueblood swash leveler is the quickest, easiest and most accurate way to set up the swash but if you don't have a swash leveler check out this post:

http://www.runryder.com/helicopter/p1297231/

This person explains how to level the swash and check for interaction with a pitch gauge. I found it to be a very interesting way for set up.

There is a very fine line between "hobby" and "mental illness."

08-10-2007 Over year old.

HOMEPAGE

brifa
Senior Heliman
Location: ITALY

i have a 611 with 9256 and this setting:
25% gain
travels 115% both ways
Control Delay I (Rudder Stick Operated), Right and Left = 15
Control Delay D (Rudder Stick Returned), Right and Left = 50
3d mode
cmt mode
3rd hole out from center on 4 star servo horn

i think that end point must be settled to max
it's very fast in this way

08-11-2007 Over year old.

1 page

259 views

POST REPLY

Mikado Modellhubschrauber	.	GrandRC	.	CanoMod
	.		.

Align T-REX 600N 700N > end points and swashplate??

PRINT TOPIC

Advertisers

Subscribe to This Topic