Speedbird370
Heliman
Location: Sweden
| This is the settings i use on the Power Jazz for my XLV - E 
Brake-off yes
Battery – Li-poly yes
Battery empty- Slow down yes
Lipo- 3.0V (1.0) I have it set on 3.0 V you can go down to 2,8 V per cell under load so no problems with that setting
Startup- Smooth yes ( 12s )
RPM control- on or off on, this is the governor, in idle up 0 you have a curve like 0, 25, 50, 75 %
and in idle up 1 you set a flat curve, if I remember correctly I have it set on 75% to get 840 rpm head speed on my MX-22 the % may differ from one brand of tx to another
Timing- Auto yes
Stick positions—Auto(arm) or fixed……….
I use the fixed positions programmed below
Set motor off position...
this sets the of position, the throttle stick full down
Set full gas position
move the throttle stick to full power
Set brake position- if you have set the brake to the of position above this function is deactivated
/Perry |
-.jpg)
