RunRyder - What channel setup for Cyclic Servos??

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 752 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

184 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	Heli Wholesaler
	.		.

Align T-REX 600N 700N > What channel setup for Cyclic Servos??

Rockohaulic
Elite Veteran
Location: Valencia, CA, USA, 3rd Rock from the Sun

Yes, I know it's a newby question, but the last time I really saw the info written down was with my old 450SE.

Anyway, for Futaba, Ch1 is Ail, Ch2 is Ele, and Ch6 is Pitch.

So for the Trex Nitro CCPM, You have a Left Front Servo, a Right Front Servo, and a Rear Servo for Cyclic.

Which channels have you guys been assigning to these 3 servos???

I got a helicopter for my girlfriend,
It was a good trade!

07-01-2007 Over year old.

MJHiscott92504
Veteran
Location: James Hiscott #6 Carter Place Monroe WA 98272 USA

Cyclic servos

I will not steer you wrong on this one and you wont go wrong by using Hitec HS925MG gear for Cyclic. They are top of the line and I have never had a Hitec servo fail. Promise if you go with these you will be very happy, they are fast and tough as nails. retail is anywhere from $66 to $73 each, shop around and you will find the best deal for them. They are going into my 600N.

Owner of MJHeli Products

07-01-2007 Over year old.

HOMEPAGE

Rockohaulic
Elite Veteran
Location: Valencia, CA, USA, 3rd Rock from the Sun

I'm not looking for servos - got servos.

Question is about setting up radio................

I got a helicopter for my girlfriend,
It was a good trade!

07-01-2007 Over year old.

flyboy933
Heliman
Location: Cajun country USA

What radio are you using Rock?

07-01-2007 Over year old.

baddraptor
Elite Veteran
Location: valencia, ca- usa

Rear is elevator
Front left ( as viewed from front) is aileron
front right is pitch

**Unattended children will be givin a shot of espresso and a puppy**

07-01-2007 Over year old.

Rockohaulic
Elite Veteran
Location: Valencia, CA, USA, 3rd Rock from the Sun

It's a Futaba 9CHP (non-super).

I got a helicopter for my girlfriend,
It was a good trade!

07-01-2007 Over year old.

Rockohaulic
Elite Veteran
Location: Valencia, CA, USA, 3rd Rock from the Sun

So Baddraptor.............

What you REALLY mean to say is that the actual Front Left Servo (if viewed from behind, oh I don't know, like your hovering it maybe!!!), is Pitch and the actual front right is Aileron!

Right?

Sheeeeeeeeeesh, my simple brain can only take so much!!

By the way, with everyone gone today, I practiced hovering inverted for 2 tank fulls! Got pretty good at it!

I got a helicopter for my girlfriend,
It was a good trade!

07-01-2007 Over year old.

baddraptor
Elite Veteran
Location: valencia, ca- usa

Yea, thats what I mean...lol.
I have spent all day programming my radio. This is not fun, I wanna fly!!!

**Unattended children will be givin a shot of espresso and a puppy**

07-01-2007 Over year old.

flyboy933
Heliman
Location: Cajun country USA

I also have a 9c. Looking from the tail,mine is channel 1 on the left, channel 6 is on the right and channel 2 is the back. Change your swash in paramiters to SR-3. I reversed channel 1, also throttle channel 3 is reversed. I then went to the swash AFR. On aileron I have -75, on elevator I have -75, and pitch I have +47. You can adjust those to your liking.

07-01-2007 Over year old.

Rockohaulic
Elite Veteran
Location: Valencia, CA, USA, 3rd Rock from the Sun

Good info flyboy933 - thanks!

I got a helicopter for my girlfriend,
It was a good trade!

07-02-2007 Over year old.

1 page

184 views

POST REPLY

3D Heli Depot	.	JR-Spektrum	.	Gyro Hobbies
	.		.

Align T-REX 600N 700N > What channel setup for Cyclic Servos??

PRINT TOPIC

Advertisers

Subscribe to This Topic