rdrude
Heliman
Location: charlestown, indiana usa
| Iam running into a problem that has me stumped. I am assembling the 600 belt version with a DX7 and 401/9254 combo. When I set up the rudder not hooked up to the gyro, I have no binding issues on the rod back to the tail. When I hook up the 401, I am getting binding with left rudder. I have it set up according to the Raptor Technique website with the limit maxed at 140 and the left rudder sub trim at 85%, and right rudder at 100%. If I turn the limit pot on the gyro down around 100 or 110, then my binding goes away. Is this ok? It appears to be set up correctly mechanically... Any help would be appreciated!
Thanks
Rob |
