rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 529 ONLINE 38 EVENTS SEARCH REGISTER  START HERE
 
1 page442 viewsPOST REPLY
Model Rectifier Corp . PowerHelis . JR-Spektrum

.
.
Align T-REX 600N 700N > Help with YS 50 & MP 5
 
 
TerranAce007
Veteran
Location: Texas

I've gotten my 600 Nitro Pro built and am setting up all the electronics, but I am not sure what to do with the YS 50 fuel tubing setup. The manual says to plug the muffler tap on the MP5 since the engine has its own pressure system. Right now I have it setup like the diagram in the manual with the tap on the muffler open and waiting to be "plugged." What's the best way to do that?

USE LINUX!
06-24-2007 Over year old.
 
 
arclite5
Heliman
Location: coral springs, florida - usa

I had a friend help me set up mine also ;] What we did was screw a "nipple" onto the hole in the MP5, then put a small piece of fuel tubing on it, and then put a plug into the fuel tubing.

Apparently one of those nipple plug things is supposed to come with the muffler so you can use it with a normal muffler pressure system, but one didn't come with my MP5.. Luckily my friend had one laying around.
06-24-2007 Over year old.
 
 
BOOGIE
Key Veteran
Location: LAFAYETTE LA

I used this and a small piece of fuel line http://www.ronlund.com/Merchant2/me...y_Code=Fittings

Team PO-BOY
06-24-2007 Over year old.
 
 
inkspot1967
rrProfessor
Location: cranston ri.

the mp5 should come with a screw to plug up the pipe or a nipple.

the ys doesnt use muffler pressure
heres how i did mine with a hatori pipe no difference in either pipe same fuel routing



Trex700fbs soon
Vibe50fbs
Next-D Rave
WENZEL CANOPYS
Flybars are for Pussies.
06-24-2007 Over year old.
 
 
TerranAce007
Veteran
Location: Texas

Ok, that looks like it will work.

Thanks guys!

USE LINUX!
06-24-2007 Over year old.
 
 
Buzzin Brian
Elite Veteran
Location: College Station, Texas

It will work either way. I have put feul tubing over nipples on pipes many times before. The MP5 50 might indeed not have that screw in the package. I will have to check when I get back to the office. If it doesn't I will see what can be done for future runs of the pipe. But for now a little piece of fuel tubing and a small 3mm screw will sufice. Thats how my Raptor 90 is now. Works fine.

Build it, fly it, crash it. Repeat as often as needed.
06-24-2007 Over year old.
 
 
Royrex
Senior Heliman
Location: TN USA

Inkspot,
What Hatori muffler is that?
06-25-2007 Over year old.
 
 
1 page442 viewsPOST REPLY
Gyro Hobbies . E-flite . Next D

.
.
Align T-REX 600N 700N > Help with YS 50 & MP 5
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Monday, September 8 - 5:31 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie