rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 531 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page337 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
Align T-REX 600N 700N > Fan not warped...
 
 
QuantumPSI
Elite Veteran
Location: Boston, MA

Just letting everyone know that my fan isn't warped. This is just from eye balling it while it's spinning. I did not dial indicate but if it is indeed warped, it's too slight to discern with the human eye...

...now where was I, dh/dt = BS-dx/dt
I will fly you forever... till earth do us part
06-23-2007 Over year old.
 
 
702nitro
Veteran
Location: Las Vegas, NV

From personal experience overtightening the fan to the hub does make it warp, but if you just tighten the screws enough to keep the fan on you can barely notice it. I know, I know i'm stating the obvious. I guess that in this hobby were so over programmed to correlate tightness with safety, security and performance, which isn't always the case; There is a fine line between secure and being over torqued.

Look Ma No hands!!!
06-23-2007 Over year old.
 
 
MJWS
Key Veteran
Location: Airdrie, AB - Canada

Mine wasn't warped either, but I took it out today to see how it was going. It definately torques somehow in flight. I had lots of clearance with the shroud, but the sensor hit the top of the fan and marked it. Lots of space on the bench.

My shroud got relieved on the outside too so I can inspect a little easier.

Mike
06-23-2007 Over year old.
 
 
inkspot1967
rrProfessor
Location: cranston ri.

my fan wasnt warped but after flying mine my magnet got thrown out and broke my atg sensor along with it. not happy with that.

im very happy i got a cnc fan for it now i wont worry anymore

Vibe50 VBar flybarless 12X Radix ATGv3
Next-D Rave
WENZEL CANOPYS
Flybars are for Pussies.
06-23-2007 Over year old.
 
 
1 page337 viewsPOST REPLY
Advantage Hobby . Revolution Models . CarbonXtreme

.
.
Align T-REX 600N 700N > Fan not warped...
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 5:38 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie