Helitronix
Senior Heliman
Location: Marlborough, MA - USA
| The Helitronix Multi-Mixer is now available. This was formerly known as the Tandem Rotor Mixer. It is now known as the Multi-Mixer because it incorporates mixing capabilities for three types of models; standard rotor, tandem rotor and coaxial rotor craft. You configure which mixing type you need from the removable display module. It improves upon the features and capabilities of the original mixer and adds specific features for tandem rotor and coaxial rotor craft.
I created this mixer specifically to address the needs of those of us scratch building our own tandem rotor and coaxial rotor craft. It supports many swashplate configurations which makes it applicable to nearly any design you might build. It is also suitable for retrofitting your original mechanically mixed Hirobo tandem rotor with an up to date electronically mixed system.
The Multi-Mixer supports the following features:
• Mode select between standard, tandem and coaxial rotor
• Servo configurations supported: 2-servo standard, 3-servo 120 CCPM, 3-servo standard, 3-servo 90 CCPM, 4-servo 90 CCPM.
• Electronic phasing: -45 to +45 degree phasing in 1 degree increments.
• Servo Reverse for each servo
• Sense Reverse for pitch, roll, collective pitch, and yaw axis controls.
• Digital Servo Centering Trim Adjustment for each servo.
• Control Axis Trim Adjustment for the pitch, roll, collective pitch, and yaw axis.
• Differential Collective Pitch (DCP) to control the pitch axis for tandem rotor craft and the yaw axis for coaxial rotor craft. The DCP mixing ratio is adjustable from 0 to 100% per rotor head.
• Elevator Mixing is available for tandem rotor craft. The elevator mixing ratio is adjustable from 0 to 100% per rotor head.
• Supports both analog and digital servos.
• Compatible with most gyros.
If you would like to read more about it, or order one, please visit http://www.helitronix.com for details.
Thanks,
Joel- |
Stan
