Malorie
Elite Veteran
Location: Paw squared, MI
| A bit tricky to explain but if the Benzine is anything like the Bergen, here goes.
Assemble the boom as you would if the torque tube were cut to the proper length. When you push the boom into the frames, let the tail gear box hang away from the end of the boom on the torque tube. Measure from the end of the boom to the shoulder on the tail gearbox. This will give you the length that you need to remove.
Hey, I guess that wasn't so bad after all. 
Hope this helps,
Malorie
Life's a journey, NOT a destination. |
