tnbulldog
Senior Heliman
Location: Cookeville, TN
| Plug the remote limit into Channel 7.
Make sure AUX2 is set to AUX2.
Calibrate the Revmax per the manual.
Flat line you're Idleup curve to 100%.
Have a backup Idleup curve with your usual settings.
Set the plus endpoint to the approx value listed in the RevMax manual for the expected RPM e.g. 75% will give approx 1900rpm.
Set the minus endpoint to zero - this will allow you to disable the RevMax with the Aux2 switch.
This is how I set mine, but note I normally leave the revmax enabled in Normal Mode and only use 1 setpoint for the limit in all flight modes. |
