rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 409 ONLINE 28 EVENTS SEARCH REGISTER  START HERE
 
1 page306 viewsPOST REPLY
Century Helicopter . MTA Hobbies . Model Rectifier Corp

.
.
Radio - JR & Spektrum DSM > DX7 and GY401 help
 
 
Pyrock
Key Veteran
Location: SF Bay Area

I have a DX7 and a 6100 Rx in my Trex450SE. In "Normal" mode, everything is fine but when I switch to "Idle Up1", the gyro light starts blinking. The gyro is plugged into the Gear channel and the Gear channel is set up as "gear" so that the gain is controlled by the Gear throws. All that is fine and dandy but my only problem is in Idle Up1 and Idle Up2 (or stunt1 & 2). What am I doing wrong?

Blinged Trex 450SE, Stretched Logo 10 3D, Ion-X
02-15-2007 Over year old.
 
 
SC Raptorman
Senior Heliman
Location: South Carolina

Check and make sure you have Aux 2 Ch cut off . You have to go in this set up before you turn radio on , Hope this helps.
02-15-2007 Over year old.
 
 
Pyrock
Key Veteran
Location: SF Bay Area

I believe the Aux2 is set to "INH" and Gear is set to "GEAR". Is that what you mean?

Blinged Trex 450SE, Stretched Logo 10 3D, Ion-X
02-15-2007 Over year old.
 
 
SC Raptorman
Senior Heliman
Location: South Carolina

Thats what I was talking about Aux2 inh .Make sure gear to gear is selected.
02-15-2007 Over year old.
 
 
Pyrock
Key Veteran
Location: SF Bay Area

That's how I have it set up but I still get the blinky thing on "stunt1" and "stunt2". The funny thing is that I had the same problem on my Logo 10 3D and I messed with it then when I plugged it in, viola! all modes and no blinky. The problem is that I dont know exactly what I did. If no one has any further input, I will have to systematically go through the menus and make sure they are both set up identically. The only other difference is that the Logo is on the 7100 and the Trex is on the 6100. Not sure if that makes a difference.

Blinged Trex 450SE, Stretched Logo 10 3D, Ion-X
02-15-2007 Over year old.
 
 
Pyrock
Key Veteran
Location: SF Bay Area

I figured it out...You have to make sure that all the rudder trim for each mode are the same otherwise the Gyro thinks your trimming it.

Blinged Trex 450SE, Stretched Logo 10 3D, Ion-X
02-15-2007 Over year old.
 
 
1 page306 viewsPOST REPLY
3D Heli Depot . JR-Spektrum . Gyro Hobbies

.
.
Radio - JR & Spektrum DSM > DX7 and GY401 help
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, October 8 - 6:38 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie