RunRyder - can't get throttle trim memory to work

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 689 ONLINE 24 EVENTS SEARCH REGISTER START HERE

1 page

135 views

POST REPLY

Revolution Models	.	CarbonXtreme	.	Midland Helicopters
	.		.

Radio - JR & Spektrum DSM > can't get throttle trim memory to work

Zman
Senior Heliman
Location: Florida

When I first set everything up, the throttle trim memory worked like a charm. I then redid some throttle curves and after all was good I rebinded the model. The throttle trim ended up at a different setting. Now when I shut down throttle and then next flight I hit the throttle trim switch and it doesnt return to last setting and I half to manually trim it up. I checked that throttle recovery was activated and it is. Any idea what I am doing wrong? In the manual all it says is make sure throttle recovery is activated. and how to get to that screen.

Thanks
Z

02-12-2007 Over year old.

Tday
Key Veteran
Location: Needham, MA

Well, the way mine works is when you kill the motor (hold the trim down continuously until it hits bottom---the very next time you turn the radio on--tap the throttle trim switch up once quickly and it snaps to the setting prior to the "kill." Is that what you're saying it won't do?

Tom

2 + 2 = 5 for extremely large values of 2.

02-12-2007 Over year old.

HOMEPAGE

Zman
Senior Heliman
Location: Florida

Okay, I am only bringing throttle trim down to point the engine shuts down, do I need to bring it all the way down to get it to work?

Mike

02-12-2007 Over year old.

Tday
Key Veteran
Location: Needham, MA

Not sure, but I think so---otherwise the radio probably just thinks it's an idle setting.

2 + 2 = 5 for extremely large values of 2.

02-12-2007 Over year old.

HOMEPAGE

bob00
Veteran
Location: Toronto, ON

Gotta bring it all the way down in one non-stop motion.

- R

02-12-2007 Over year old.