Hey all, I just got my DX7. I have always flown futaba and was hoping to get a little help setting up my 120ccpm spectra. Are the channel numbers on Spektrum same as futaba (other wise 3 = throttle, 6 = pitch etc?). I was hoping to find an article on someone who has step by step set up a 120 ccpm on a dx7???? Thanks
Z
02-07-2007 Over year old.
G-DAVE Veteran Location: Tyne and Wear , England
No there different -- the same as JR . Throttle is No1 were it's 3 on your Futaba. Then just number them down from the Throttle ie Aileron - Elevator - Rudder - Gyro - Pitch - aux 2. Dave
If it's not fun, your not doing it right !
02-07-2007 Over year old.
Zman Senior Heliman Location: Florida
Thanks
I will also be running a gov and the gyro remotely. Will I need to y harness one of these with the battery?
Thanks Z
02-07-2007 Over year old.
jurgen Senior Heliman Location: Weybridge, Surrey, UK
No, on the AR7100 rx there is a seperate battery connector (also used for binding).
Will I need to y harness one of these with the battery?
No. As Jurgen said, there is a separate battery connector. We use channel 5 for the gyro gain and channel 7 for the governor. In our case we always have the same gyro gain and governor speed so it doesn't matter which is which except for when making end point adjustments.
thanks. Have any of you set the DX7 on a MA ccpm120 machine. getting a little stuck on the programming.
