bcane98
Heliman
Location: APO (USAF)
| My friend bought this helicopter and after some trouble shooting I have come to the conclusion that his 4n1 is shot... I think.
I have done some troubleshooting before on my BCX, so I did the same to find out why the bottom blade spins before the top blade and it wants to turn to the left.
This is what I have done:
1. Stick all the way to the left, then slowly added throttle... bottom blade spins first then top blade started to spin about 5 clicks up
2. Stick all the way to the right, then slowly added throttle... bottom blade spins first then top blade started to spin about 5 clicks up
3. Turned the proportional all the way to the right... trimmed to the right. no change... then all the way to the left. no change
4. Swapped motors connections on the 4-n-1... top blade spun first then bottom blade. This leads me to believe it's the 4n1 unit...
5. Turned the gain all the way down and the blades start one after the other, but it still piro's to the left...
I would like to help my buddy out as he likes the helicopter, but is becoming disappointed at his first experience. Too bad he didn't listen to me about getting a BCX. Does anyone have any suggestions?
Think Twice... Post once! |
