rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 785 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page266 viewsPOST REPLY
Revolution Models . CarbonXtreme . Midland Helicopters

.
.
Compass Knight 50 > Just finished the bench build
 
 
AzHyper
Veteran
Location: Peoria, Az.

Hey Knight flyers -

I just completed the build up of the plastic version. I did drill another hole in the mixing arms 3mm in towards the mainshaft to get some additional action. Now with swash mix collective at 70% I get the following collective values after much fiddling:
+13
+6.5
+.25
-6.5
-13
I will fine tune this after break-in with the pitch curve.

I have the ail and ele swash mix set at 60% and I can get 7* cyclic and LOTS of paddle deflection. Binding is very very minimal even in the corners.

So, how do these numbers sound to those of you who have already set-up and flown their plastic version?

It's too cold to spray the clear on the canopy here now so I'll have to add some temporary balance, but I hope to start on the break-in and fine tuning this weekend.

Any input????
12-22-2006 Over year old.
 
 
JONW
Heliman
Location: Fontana, Ca

Your doing great, The numbers are pretty right on.
12-22-2006 Over year old.
 
 
scottc
Key Veteran
Location: shakopee minnesota..USA

Yours are very close to mine, MAKE sure your phasing ring is set right, mine was way off and almost cost me a crash on the first test flight...

Hey I didn't ask for this fetish.!!!But I'am sure paying for it....
12-22-2006 Over year old.
 
 
1 page266 viewsPOST REPLY
HeliProz . ZoomsHobbies . HeliHobby

.
.
Compass Knight 50 > Just finished the bench build
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Thursday, December 4 - 12:41 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie