husafreak
Senior Heliman
Location: NorCal
| Sorry I'm not home right now to check model numbers and gear ratios but I have the AXI motor which is equivalent to the recommended Twister, 910 mAh Thunderpower 3 cell pack, 10 amp Castle Creations speed control, Futaba S110's on cyclic and Hitec 50 on Futaba 410 gyro. I also like the Futaba mini PCM (RX 146i I think). This is a very good system. Some have used Hacker inrunners for more ballistic power. And don't forget to buy a couple of extra kits at 90$ each for a nice collection of spares!. 1320 mAh packs make it a little nose heavy but better outside. I removed the boom supports from mine too, It's pretty light. You might want to put 5mm thick balsa blocks under your collective servos (I glued mine in using the frame/masking tape/glue/wood/glue/tape/servo sandwich method) and then I used Trex balls and links at the servo horn (you have to drill out the TRex links a bit to accept the x3D threaded rods) I will try to post some pics but it won't be until after Christmas, have fun! Eric |
