rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 655 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
4 pages [ <<    <     1      2     ( 3 )     4     NEXT    >> ]3193 viewsPOST REPLY
MRC/Altech Marketing USA . Ace Hobby . JR-Spektrum

.
.
Synergy R/C Synergy N9 > All Synergy Dial Indicating Problems SOLVED once and for all
 
 
raptorheli2
Elite Veteran
Location: rip off britain and no changing it

unlike todd we had parts (see video above) not fit to be dialed in first place.

you seem to be yet another one that can't grasp that some kits are ok and some are not qc wise. do we have to use crayons or chalk or something to get this through?

also i could get to 4 thou on my 2nd kit in about 30 mins but it seems only synergy rc that thinks 4 thou is acceptable. it's 1 or less for me on all helis and a high end 90 should be no different.

cheers


www.waterfoothelis.com
12-16-2006 Over year old.
HOMEPAGE  
 
 
Obiwan
Veteran
Location: Sevilla, Spain

I ordered mine yesterday, I also got almost pissed off with the dialing thing

Until today I was really afraid of having to dissasemble my YS91 out of the N9.

Sure not a bling thing but a usefull upgrade IMHO.

Best way to predict the future, is to Invent it.

FORMERLY KNOWN AS ForrestGump
12-16-2006 Over year old.
 
 
Kinger
Elite Veteran
Location: Columbus, OH

Having this unit available certainly changes my mind about possibly owning a Synergy in the future. That original clutch stack was definitely not a selling point for me.
12-16-2006 Over year old.
 
 
John Benario
Senior Heliman
Location: Atlanta

The split collar is very nice. There are 12 mm split collars in industry but they are very bulky. This Hyperformance split collar will suffer the same wear issues that any aluminum collar has in that the steel inner bearing race will wear into the aluminum which then allows the shaft to move. I would suggest putting a 12 mm brass or steel shim between the aluminum collar and the bearing. I have done so with my stock setscrew collar and so far (maybe 25 gallons) no wear and no slipping.

I will probably get a couple of these split collars as I am a big fan of split collars versus setscrew collars.

John Benario


John Benario
12-16-2006 Over year old.
 
 
valerko
Veteran
Location: ny,dutches county

Bottom line is,even that this one costs arm and a leg ,oppose to stock one,THEY HAVE IT IN STOCK, and no more nightmares with dialing.
12-17-2006 Over year old.
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

Synergy fan hub is £18.99 that is more expensive than something that hopefully cures this problem once and for all!

Quotes may have been changed for my own amusement
12-17-2006 Over year old.
 
 
LoganAZ
Senior Heliman
Location: Phoenix. Arizona, USA

my fan was like 19 thou off and with a little copper tube and the engine and clutch in the heli i bent it to within 4 thou on first try and havent had any vibration problems at all... that took me mabe 30 seconds to bend it from 19 to 4... i dont see how all you guys are spending hours on stuff like this??

LOWER
12-18-2006 Over year old.
 
 
Stu.
Veteran
Location: Abrakebabra Kebab shop

Its the outer of the hub that should be under 1 thou, not the tip of the shaft.

check yours it might be like this

http://www.youtube.com/watch?v=bSmoBcsRi-g

4 thou isnt acceptable for the hub to be out. needs to be under 1 thou. The tip of the start shaft should be the same. If it is 19 thou to begin with then something is very wrong. Sounds like your hub is machined off centre. Or you are using the old style collets.

Stu

www.waterfoothelis.com
12-18-2006 Over year old.
 
 
3DPP
Senior Heliman
Location: Vienna/Austria

Tyler
do you know that guys?
e-mail adress do not work, get allways an error on that
br peter

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

orders@hyperformancerc.com
12-20-2006 Over year old.
HOMEPAGE  
 
 
wascheck
Senior Heliman
Location: Goiânia,GO - Brasil

Quote 
Tyler
do you know that guys?
e-mail adress do not work, get allways an error on that
br peter

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

orders@hyperformancerc.com


I had the same problem. I would like to contact them because obviously, I want to buy the hub and the collet. Tyler or Carl Bonta, can you help us?

Fernando
Synergy N9
12-20-2006 Over year old.
 
 
Carl Bonta
Heliman
Location: Elgin, IL USA

Wascheck
You have been emailed
12-20-2006 Over year old.
 
 
wascheck
Senior Heliman
Location: Goiânia,GO - Brasil

I saw...Thanks for your help Carl...

Fernando
Synergy N9
12-20-2006 Over year old.
 
 
Simon - R
Senior Heliman
Location: uk

any way we can get these bits in the uk ?
12-20-2006 Over year old.
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

Si,

just order them!! Its allowed you know!

Quotes may have been changed for my own amusement
12-20-2006 Over year old.
 
 
wascheck
Senior Heliman
Location: Goiânia,GO - Brasil

Quote 
any way we can get these bits in the uk ?
They fixed the web store for international orders, just go to their homepage and buy, I bought mine yesterday.

Fernando
Synergy N9
12-21-2006 Over year old.
 
 
Simon - R
Senior Heliman
Location: uk

Thanks Droid ,could not find details on web site ,i've had no prolems with std setup but it looks like a good upgrade ........not that it needs it of course!!!!! simon
12-22-2006 Over year old.
 
 
Simon - R
Senior Heliman
Location: uk

one on order .hope the system works !!
12-22-2006 Over year old.
 
 
wascheck
Senior Heliman
Location: Goiânia,GO - Brasil

Simon-R
Mine has already been shipped...

Fernando
Synergy N9
12-22-2006 Over year old.
 
 
Simon - R
Senior Heliman
Location: uk

mine too good service so far ,i wonder how long to get hear ?
12-22-2006 Over year old.
 
 
Droid
Elite Veteran
Location: Deep down in the Southwest- UK

1 week and waiting methinks crimbo is getting in the way, damn that fat red f@cker.

Quotes may have been changed for my own amusement
12-22-2006 Over year old.
 
 
4 pages [ <<    <     1      2     ( 3 )     4     NEXT    >> ]3193 viewsPOST REPLY
E-flite . Futaba-RC . Next D

.
.
Synergy R/C Synergy N9 > All Synergy Dial Indicating Problems SOLVED once and for all
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, July 9 - 5:08 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie