RunRyder - HDX 500

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 626 ONLINE 24 EVENTS SEARCH REGISTER START HERE

4 pages [ << < 2 3 ( 4 ) > >> ]

11790 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

e-HeliDirect HDX 300-600 > HDX 500

HeliDirect
rrAdvertiser
Location: USA

with the new paddle, mixing arms, washout levelers and new longer tail blades, the tail holding authoritiy is excellent and the cyclic is much faster. I am really happy with this kit now. Will post more linkage set up soon.

Steve

07-05-2007 Over year old.

HeliDirect
rrAdvertiser
Location: USA

Quote
the only difference between the SA and SE is the plastic head parts & tail assemblies? otherwise, the frame is the same?

The frame is same but we also received different SA frame that is a little bit different. It can work with big cyclic servos. I will post the pictures soon. This will allow 2 different settings with different servo options. Frame is made of G10 material and all parts inside frame is also cnc aluminum.

The HDX500SE and HDX500SA use same cnc aluminum swashplate, same fiberglass canopy and same fiberglass main blades also.

Steve

07-05-2007 Over year old.

jsahn90
New Heliman
Location: anyang, gyung-gi, Korea

I have 3DX-500 which is cron of the HDX-500.
I found out they are a little bit different each other especially Center hub, and seesaw.
If I would modify the head structure making the same as HDX-500, what parts should I buy? only two of these? or more?

as far as tail blade goes, I use the one for EP-8 made from Quick japan rather than the original one. It is longer than original one, and perfactly fit to it.

07-11-2007 Over year old.

HeliDirect
rrAdvertiser
Location: USA

you need a center hub and a flybar seesaw to upgrade to HDX500 style.

07-11-2007 Over year old.

Wirestealth
Heliman
Location: Portugal

do you have tha parts needed?

I dont see it in your site ! Im very happy with this bird!

the hitec 85mg its a litle slow for me but its ok! I Have the 9650 on the tail with the 401 and carbon 68mm and rock n rool!!!

I prefer this Heli to lepton ! is more low cost crash and very sweet heli!

Nuno from portugal

07-14-2007 Over year old.

ozhelirookie
Heliman
Location: Perth

HDX 500 speedy

Anyone one had an issue with the 60 amp stock speedy.
I run a FP 5s 3300 battery. Tested it today and it went into limp mode after 1 minute @ 90% on the TX. These are rated for up to 6s batteries. Maybe just a bad one in the bunch. I don't know any thoughts anyone ?

07-14-2007 Over year old.

Nick Jones
Key Veteran
Location: ....

Are you using the stock motor/pinion?

07-14-2007 Over year old.

ozhelirookie
Heliman
Location: Perth

Stock motor & stock 24T pinion.

07-14-2007 Over year old.

red_z06
Key Veteran
Location: Dumont, NJ

Stock gear ratio is 3.917 with 94T main and 24T pinion.
At this low ratio, with stock motor or 890kv, even 4s setup will want to produce 3300-3400 head speed. I believe 20T will be more reasonable at 2800 or so head speed with 4s.

For 5s setup 18T pinion will be ideal and will produce 3100 or so head speed.

www.justinchi.com

08-03-2007 Over year old.

HOMEPAGE

FH-Canada
Senior Heliman
Location: Winnipeg, MB, Canada

Here is a pic of my 3DX with the landing gear lift and fins. Crashed it again today.... doing things too low! I have a high pitch sound sometimes from my heli that I don't know what it is... ESC setting perhaps or motor bearings.... don't know. What settings does everyone use on the stock Sonix ESC/motor. I do have some bog. What would a good 4S motor be to get?

08-04-2007 Over year old.

jimboflies
Elite Veteran
Location: Beaumont, Texas,A Pimple on the ASS of society

Z-Power , Z20-1500/1470kv , or the 550 Lightning by Century , it is the same motor as the Z20 , just a different color!VERY powerful on 4s1p 3700mah 20C
http://www.heli-world.com/detail.aspx?ID=8458

Quick of Japan RULES
EP8v2 EX x 2
Trex450v2
EP9

08-04-2007 Over year old.

HOMEPAGE

FH-Canada
Senior Heliman
Location: Winnipeg, MB, Canada

How much more power over stock? Thanks.

08-04-2007 Over year old.

FH-Canada
Senior Heliman
Location: Winnipeg, MB, Canada

What pinion should I get for the Z20 Jimbo? I think I am going to get one along with the Z10 for my MT!

08-05-2007 Over year old.

FH-Canada
Senior Heliman
Location: Winnipeg, MB, Canada

Would anyone be interested in my 3DX-500? I am thinking of selling it to go all larger stuff. Will sell it with out motor/ESC as I am having problems with them, other then that it is a nice machine!

EDIT: just put it up.... http://runryder.com/helicopter/t369038p1/

08-26-2007 Over year old.

helicogil
New Heliman
Location: Geneva-Switzerland

HDX500-foto

Hello everyone,
Just to show my swiss-HDX500 and to say you....hi