rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 702 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page718 viewsPOST REPLY
Heli Wholesaler . 3D Heli Depot . JR-Spektrum

.
.
Synergy R/C Synergy N9 > Model Avionics parts for Synergy
 
 
Dusty
Senior Heliman
Location: Edmonton, Alberta - Canada

Sent an email off to Model Avionics inquiring about a mount for the sensors to fit the Synergy N9's.

Looks like they are being made up right now.

Although they don't have an ETA it should be soon if anyone is interested.

Shawn

Canada Shawn
09-12-2006 Over year old.
HOMEPAGE  
 
 
bobc1
Senior Heliman
Location: Southern California

You can use the 30-50 size mount that is supplied with the TJ. Don't use the supplied 90 degree N9 mount. Instead, use the front bearing block bolt with a spacer & mount the TJ mount parallel to the frames. Just cut the excess off of the top of the mount.

This configuration is easy to do & is more convenient to remove the sensor if necessary.

Someone told me about this method & it seems to work well.
09-12-2006 Over year old.
 
 
Spookyeng
Heliman
Location: Gulf Breeze, FL USA

I ended up using the 30-50 mount and modified it like the pictures show. Overall it took about 1 hour. You have to install the pickup at a slight angle and oblong the MA mounting holes. additionally you have file a flat spot on the 2.5mm washers to get both in there, tight fit for both 2.5mm bolts. I am showing a good sense signal @ 1mm gap between the magnet and pickup. I hope this help, take it easy

09-13-2006 Over year old.
 
 
Dusty
Senior Heliman
Location: Edmonton, Alberta - Canada

Sweet!

I'm using an optical sensor, but sounds like it will work, being as I currently run about 5mm between the sensor and the tape strip.

Thanks guys!
Shawn

Canada Shawn
09-13-2006 Over year old.
HOMEPAGE  
 
 
1 page718 viewsPOST REPLY
Gyro Hobbies . E-flite . Next D

.
.
Synergy R/C Synergy N9 > Model Avionics parts for Synergy
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 12:33 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie