Flipflyer
Heliman
Location: Riverside, California
| There is an interference problem of the A arm against the crossmember forward of the arm on the EM version. This is probably what's been causing the glitching issue that lot of people seem to be having. This is specially bad if you set up the linkages with the typical 90 degree geometry that is use for 3D. I don't understand how Compass missed this one on their engineering. However, there is a solution to the problem. Remove the crossmember and secure the canopy post with low profile button head screws or countersunk screws (this requires countersinking the frame). Make sure the screw head is sufficiently low so that the A arm doesn't hit it when you move the cyclics. |
