ARMSMASTER
Veteran
Location: spokane, wa
| I have been asked several times on how to set up the tiger 50 on a JR9303. The process is not all that diffacult. I basicly used the set for the JR Venture 50. You can download the radio set up instructions from the horizon website:
http://www.horizonhobby.com/Prodinf...9015-manual.pdj The only three things to take into considderation is that you need to make sure that the servo's are plugged into the right channels(pg24), are going the right direction(pg21). First make sure that the collective makes the servo's all opperate in the same direction. If not, reverse any servo that is going the wrong direction. Once all servo's work in the same direction with the collective you can then check to make sure the cyclic is working in the right direction. If not you need to go into the swash mix function in the list menue Pg21). These directions are for the Jr8103 but work the same in the 9103. You may also refer to the Jr9103 manual for directions. I found that the Venture 50 manual was a great help in understanding the basic setup. Make sure that you set up the mid stick collective at 0* in idle up1. You can then make pitch adjustments for normal mode for your own flying style and skill level. This should get you close to getting the tiger set up with the 9303. If anyone elso has any insight to the 9303 setup for a tiger please jump in. I hope that this helps with the 9303 setup.
Thanks,
Perry
Caution or the Earth will Swallow you Up! |
