RunRyder - tiger tracking problem

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 432 ONLINE 38 EVENTS SEARCH REGISTER START HERE

1 page

300 views

POST REPLY

MTA Hobbies	.	Model Rectifier Corp	.	PowerHelis
	.		.

Audacity Models Pantera 50 - Tiger 50 > tiger tracking problem

planesarenofun
Senior Heliman
Location: chandler, az

took my tiger to the field today, and the blades kept going out of track. first they would be fine, then 5 mitutes later they would be way out. and back and forth. theres nothing loose, no slop in the head or anything. headspeed is good and the blades are balanced. i was just hovering around, i didnt even get into ff because i was having a glitch problem

11-12-2005 Over year old.

scottc
Key Veteran
Location: shakopee minnesota..USA

check you spindel to see if its bent, that sounds like the problem, i had the same issue.

Hey I didn't ask for this fetish.!!!But I'am sure paying for it....

11-12-2005 Over year old.

planesarenofun
Senior Heliman
Location: chandler, az

that was the first thing i checked, and its not bent

11-13-2005 Over year old.

scottc
Key Veteran
Location: shakopee minnesota..USA

how did you check the spindel. that seems to be the only thing i could think of , take the blades off and turn one of the spindel nuts and see if the other blade grip moves.

Hey I didn't ask for this fetish.!!!But I'am sure paying for it....

11-13-2005 Over year old.

dbcaster
Senior Heliman
Location: Petaluma, Ca

What blades are you using they could be causing the problem?

11-13-2005 Over year old.

doorman
Elite Veteran
Location: E.Berne, NY

Mixing Arms Checked??

In the last adendum sheet it calls out something that you might what to check... see if there is any side play in your mixing arms... just try to move each one side to side... if there is play in them you take the bolt out and just shorten it about one thread or less and then put it back in until there is no noticable side play..
I have checked and matched all of mine and have no tracking issues at all.... we also did this to TUF MUFFLER and his went away also...
Please request the adendum sheet if you do not have it, since I may have not explained it exactly as it should be done, but it gives you the general idea...
Good Luck..... Stan

Take a look at #17
http://www.audacitymodels.com/T50ma...-v1_8-print.pdf

If there is a cure for this, please don't tell me about it!!!

11-13-2005 Over year old.

planesarenofun
Senior Heliman
Location: chandler, az

well i think i found the problems. there was some play in one of the seesaw arms, and when i took my grip bearings out the other day to grease them, i put the thrust bearings in backwards.

so i put them in the right way

, and fixed the sloppy arm, so well see what happens.

11-13-2005 Over year old.

1 page

300 views

POST REPLY

JR-Spektrum	.	Gyro Hobbies	.	E-flite
	.		.

Audacity Models Pantera 50 - Tiger 50 > tiger tracking problem

UPDATE SCREEN PRINT TOPIC

Advertisers

Subscribe to This Topic