rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 524 ONLINE 45 EVENTS SEARCH REGISTER  START HERE
 
1 page488 viewsPOST REPLY
Futaba-RC . A Main Hobbies . Boca Bearings

.
.
e-E-Flite Blade CP CX 400-3D > DD tail motor on blade..
 
 
Betofazzo
Senior Heliman
Location: Venezuela

Hello eveyone.. well i upgrade the anemic n30 tail motor of my blade cp whit the gws edp-50 dd and 4530 prop/adapter, i have amazing control, no problem fliying inside/outside in windy condition, use 3 cell lipo (thp 1320), original blades, i have 8 tooth on main motor, heat sink,, i'm very happy whit the result, totally diferent heli right now! try it...

I'm charging batteries.....
08-16-2005 Over year old.
 
 
BeerZman
Senior Heliman
Location: Alberta Canada

Hi there

Is it working fine and not burning out then?

What is the 4530 prop adapter?

Doesn't the original tail setup work with the motor you put in there?

Just a newb...but would like a dependbale motor back there..Mine just went...

Thanks
08-17-2005 Over year old.
 
 
Betofazzo
Senior Heliman
Location: Venezuela

Hi, the motor work fine but i fly about 10 to 12 minutes, let cool down both motors and 4-1, and fly again few minutes more.
i think is the only way to the motor last a bit more (than stock setup).
the prop adapter cost $5 (from gws too), you need to use the 4530 prop.
the blade fly good on stock setup (9,6 nimh battery), and gws edp50 motor (the same i have), less hot but about 8 to 10 minutes fliying.bye

I'm charging batteries.....
08-17-2005 Over year old.
 
 
1 page488 viewsPOST REPLY
Modefo's RC Helicopters . XHELI.COM . Autography FlightPower

.
.
e-E-Flite Blade CP CX 400-3D > DD tail motor on blade..
  UPDATE SCREEN   PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, August 30 - 5:22 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie