Location:
| Something does not make sence with the Venture and my pitch gauge. I've taken my R30 and R60 directly from the table to a solid hover with minor pattern flying for triming. For example a pitch curve that I like for normal mode is -5 too 9 with mid stick at 5-6. The Raptors were happy with this setting but the Venture is not. I used this curve with the Venture, but it will not lift into a hover. Next I entered my setup screen and increased all 5 points by 10, this allowed the bird to lift off and with a couple test climbs and slight trim adj's I was flying some 8's. When done and back on the bench I checked the pitch readings, I was blown away. At mid stick for just a hover, I had 10degs for a reading and at full coll. 15degs. How can this be? The heli flew good with these readings, I've never seen a R30 ship fly with these pitch settings. The head speed is fine, not to slow and def. not overspeeding, in fact this was the first flight on this new bird and I was totaly happy with how it handled some flips and rolls. Are these normal readings for the Venture? Some info would be great... |
