RunRyder - weston pipe needle settings

rrTV-PHOTO

New HD TV

HOME rrTV-PHOTO GALLERIES MY GALLERY HELP-FAQ

myHOME PM pmRR MEMBERS 302 ONLINE 20 EVENTS SEARCH REGISTER START HERE

1 page

260 views

POST REPLY

Boca Bearings	.	Modefo's RC Helicopters	.	XHELI.COM
	.		.

Engines Plugs Mufflers Fuel > weston pipe needle settings

gravity rebel
Heliman
Location: australia N.S.W wollongong

could anyone suggest needle settings for a os32 running 15%nitro &20% coolpower?
thanks!

08-13-2002 Over year old.

heliman41
Key Veteran
Location: Valparaiso IN. USA

Im running 11/4 out on mine but that dosent mean it will be the same for you. Is your eng used or nib unstarted? If its run in then id start @ 11/2 out and after its warmed up hovering, Id do some full power climouts. Then richen it a few clks. and see if it starts to loose power if so, THEN start to gradualy lean a few clks. until it climbs strong, as soon as you dont notice any more power increase leaning it stop and slightly richen otherwise you will be lean. Now your eng is set. Good luck. By the way im using 20% syn.

08-13-2002 Over year old.

gravity rebel
Heliman
Location: australia N.S.W wollongong

weston pipe

thanks heliman41 for the reply.
did you think the weston pipe gave you much more power?

08-15-2002 Over year old.

heliman41
Key Veteran
Location: Valparaiso IN. USA

Yes, it gave me more power and I found it very easy to adjust the main needle,(not real sensitive by just a clk.). I was using the century standard muff before and the Weston made a drastic diff. I doubt it gives as much of a power diff over a Hatori quality muff tho, so depends on what you are using now beforehand.There are two different nitro content style Weston pipes. Be sure to use the one that suits your fuel.

08-15-2002 Over year old.

1 page

260 views

POST REPLY

Autography FlightPower	.	Advantage Hobby	.	Revolution Models
	.		.

Engines Plugs Mufflers Fuel > weston pipe needle settings

PRINT TOPIC

Advertisers

Subscribe to This Topic