rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 769 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page208 viewsPOST REPLY
CanoMod . Futaba-RC . A Main Hobbies

.
.
e-Align T-REX 250-450-500-600 > Anyone using the Shogun flybar arms?
 
 
55crownvic
Veteran
Location: Colorado Springs

How well do they work?

Dave
02-20-2005 Over year old.
 
 
R/C Speed Nut
Senior Heliman
Location: Galesburg, Michigan USA

The T-Rex flybar is too big to fit in the Shogun arms, and the balls are too small for the Rex's links


Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!
02-21-2005 Over year old.
 
 
dr.overclocker
Senior Heliman
Location: clinton, ohio

yes but anyone can drill bigger hole to make them fit and from what i haer, everyone is doing it for the stability issue

full throttle... i'll figure it out from there
02-21-2005 Over year old.
 
 
R/C Speed Nut
Senior Heliman
Location: Galesburg, Michigan USA

Are you then putting Showgun links on the arms?


Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!
02-21-2005 Over year old.
 
 
dr.overclocker
Senior Heliman
Location: clinton, ohio

from what i saw you use your stock ones if you are using the shogun bar. the bar itself is a tad smaller but shouldnt matter because you will be using the grub screw to lock it down. i was then thinking about putting shrink wrap on the bar where the seesaw is at to increse the size. i may even put it on where the grub screw is also when mine come in

full throttle... i'll figure it out from there
02-21-2005 Over year old.
 
 
R/C Speed Nut
Senior Heliman
Location: Galesburg, Michigan USA

No, I was refering to the ball on the Showgun arms are smaller than the Rex's balls. That would mean having to use Showgun ball links at that spot, right?


Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!
02-21-2005 Over year old.
 
 
dr.overclocker
Senior Heliman
Location: clinton, ohio

use the t-rex arms. the bearing hole where the rod goes through will be bigger but the grub screw will tighten it down. use shogun paddles, rod. and the addapter weights. that is the only shogun stuff you need

full throttle... i'll figure it out from there
02-21-2005 Over year old.
 
 
1 page208 viewsPOST REPLY
Boca Bearings . Modefo's RC Helicopters . XHELI.COM

.
.
e-Align T-REX 250-450-500-600 > Anyone using the Shogun flybar arms?
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Friday, November 21 - 8:38 pm - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie