What tail blades is everyone using on the ion? I have a set of 97mm MS I would like to use but they are very narrow, about 1/8" gap on each side of the grip. Do they make spacers?
02-05-2005 Over year old.
Bill Ludwig Veteran Location: Tucson, AZ
Yes, the 97s will work fine - new blades usually come with spacers, but anything will work -- get creative!
- Bill
02-05-2005 Over year old.
Flyinrazrback Veteran Location: Shreveport LA
Ok will give them a shot, the ion came with TT 680s on the mains, but going to replace them with some SABs or MAHs.
02-05-2005 Over year old.
Charlie R Senior Heliman Location: Lafayette Ca
I use pop rivit back up plates .About 3/32 thich.
30 of them cost 98 cents at Ace hardward .
good Luck !
Charlie
02-05-2005 Over year old.
Bill Ludwig Veteran Location: Tucson, AZ
You won't believe the difference when you switch from TT to SABs!!
- Bill
02-05-2005 Over year old.
Flyinrazrback Veteran Location: Shreveport LA
Bill, who has the best deal on the SABs?
02-05-2005 Over year old.
Bill Ludwig Veteran Location: Tucson, AZ
They're a little hard to find, but Rick's Heli usually stocks them.
- Bill
02-05-2005 Over year old.
Flyinrazrback Veteran Location: Shreveport LA
ok thanks, I found a place on the east coast that has them too, have you seen the sab paddles? i have heard they are nice but yet to see pictures
