rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 257 ONLINE 20 EVENTS SEARCH REGISTER  START HERE
 
1 page417 viewsPOST REPLY
Gyro Hobbies . E-flite . Next D

.
.
e-Align T-REX 250-450-500-600 > External BEC Hookup
 
 
WEAVERS32
Heliman
Location: WALNUTPORT PA

I was wondering if one of you guys could tell me how to install a external bec. The bec i was looking at was 5.6 volt. Now my cc25 is still going to be pluged into the rec. as well as the bec . I guess my main question is will this hurt my cc25 or my rec.?
12-10-2004 Over year old.
 
 
mapmanufacturer
Senior Heliman
Location: Bunker Hill, WV

The only wire that has to be hooked up for the CC25 is your signal wire.The rest you dont use this will not hurt the CC25 at all . The bec red and black get hooked up to the power. Pretty easy to hook up. I forgot what wire is the signal wire i believe its the white wire but i mite be wrong.The black can stay but the red gets cut or unplugged from the connector.
12-10-2004 Over year old.
HOMEPAGE  
 
 
mapmanufacturer
Senior Heliman
Location: Bunker Hill, WV

Opps it doesnt have a white wire its the orange that is the signal wire the red gets cut or disconnected from the connector and the black can stay.
12-10-2004 Over year old.
HOMEPAGE  
 
 
WEAVERS32
Heliman
Location: WALNUTPORT PA

BEC

Thanks for the info. Makes sense now that i read it.
12-11-2004 Over year old.
 
 
derekandjennys
Senior Heliman
Location: Cedar Rapids, IA

The receiver has 6 channels and with 401, we need them all. Did you splice the signal wire from the speed control in to the BEC . Or couldn't you take the signal wires out of the plugs and swap, and just plug in the BEC wire then?

Derek
02-04-2005 Over year old.
 
 
playfair
Key Veteran
Location: Rochester, NY

I don't think it's safe to run the gyro and some servos at 5.6v...

I did a "dual voltage" setup on my SG by leaving the ESC's BEC as is, and unplugged the center "power wire" from the cyclic servos to run off my DIY BEC. All I did was remove the red wires and pins from the original servo connectors and put them in a new connector (can easilly go back if desired). Then I took a wired male pin connector and tied all 3 positions to the output of the new BEC.



You can see the BEC connector attached to the receiver in the upper right. The BEC is on the lower center of the pic.

HTH!


The sky is our canvas
02-04-2005 Over year old.
HOMEPAGE  
 
 
helicopterMark
Veteran
Location: Rumson, NJ

thats one crazy looking heli you got there playfair... my kinda bird :-) good idea one splitting the voltage btw.

Mark

Mark Schneider
Team MRC/Hirobo
Turbulence D3, Evo 90, EVO 50 EX
02-04-2005 Over year old.
HOMEPAGE  
 
 
1 page417 viewsPOST REPLY
Fast Lad Performance . Ace Hobby . Esprit Model

.
.
e-Align T-REX 250-450-500-600 > External BEC Hookup
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Saturday, November 22 - 10:06 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie