TOP CAT
Heliman
Location: London ,Ontario Canada
| Paint50 Feet
To line up your front canopy stand off's get a lazer level,just a small one or a lazer pen.
Put your heli on a table and point the lazer at the front canopy stand off.Make sure the back stand off holes are drilled. Mount the canopy on the back stand off's being carefull not to move the heli ,level the canopy and the lazer dot will point to the exact spot to drill the front holes.Mark this spot ,remove the canopy ,drill the hole.
Next step turn the heli around ,line up the other stand off with the lazer and mount the canopy using the holes drilled to level it .Now mark this spot and you now have a perfect spot to drill.
" NOTE" You have to be very carefull not to move the heli after the lazer is pointed to the stand off.
This is from past expierence.
Mallory is the best teacher. Thank her not me.
Tom |
Like working in your dreams and waking up with the job finished
