rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 601 ONLINE 29 EVENTS SEARCH REGISTER  START HERE
 ChristianM's gallery
ViewingPrinting

3D Heli Depot . JR-Spektrum . Gyro Hobbies

.
.

Welcome to Christian's gallery
Heli-Professional Revolution
 11111 views HELP-FAQ
 
 

I will update the gallery during the building.

Here is the contents of the box
The main frame and gear




The collective servo frame
The head




Swash plate and washout base
Flybar carrier and control arms
YS91, Clutch and Fan unit
Frame and engine




 
 
Load carrying parts
Tail rotor control (rotation instead of sliding)




Left side
Servo tray
Servo cabling and plumbing




Under the hood
Switch, HRPoly-X and UBEC
Dual BEC wiring schematic
Throttle setup with return spring




 
 
RevLock sensor mount
Clutch without fan unit
Fan unit with RevLock sensor mount
Under side




From below
Ready to fly (canopy not painted)
Maiden flight




Heli-Professional Revolution Spec:

Engine:
  • OS91 SZ with MP5
  • RevLock10 governor
Control:
  • CSM CycLock CCPM Mixer
  • Futaba S9252 on cyclic and pitch
  • Futaba GY611 gyro with S9256 servo
  • Quick UK base loaded antenna
Power:
  • E-Tec 11.1 volt, 1200 mAh LiPoly battery
  • UBEC switching 6V regulator for collective and cyclic
  • UBEC switching 5V regulator for the gyro and throttle
  • HRPoly-X Low Voltage warning device
Upgrades:
  • None needed
Raptor 50
 
 




Heli on my mind
Mowing grass








 
 


Raptor 50 Spec:

Engine:
  • OS 50 Hyper with MP2
  • RevLock governor
Control:
  • Futaba S9252 on cyclic and pitch
  • GY502 gyro converted to a GY601 with S9254 servo
  • Quick UK base loaded antenna
Power:
  • E-Tec 11.1 volt, 1200 mAh LiPoly battery
  • UBEC 5.0 volt switching regulator
  • HRPoly-X Low Voltage warning device
Upgrades:
  • Quick UK metal head and swash plate
  • TT Carbon blades
  • Quick UK fan
  • CarbonExtreme MicroRidged Dampers
  • Aluminum pitch lever
  • TDG Tail rotor hub
  • Uni-flow fuel tank set-up
  • and more
For Sale - Hornet II Custom - For Sale
 
 











FoamFactory Extra 3D
 
 







Future Heli Pilot
 
 
I want to play with this heli.
I think I need to adjust this flybar!!!
I am a bit sceptical about this one



Field Equipment
 
 




Adapter shaft made from a "slightly used" Raptor 50 main shaft



Other Files
 
 
Raptor Flybar Padle Mod.pdf  18k Template for lightening the original Raptor flybar padles

Hornet 2 Custom Body.pdf  84k Templates for my customized Hornet 2 C/F and AL body

Add to Photo Cache by clicking below thumbnails. To insert photo cache into new post check Add then click Preview.

E-flite . Next D . Fast Lad Performance

.
.
Sunday, October 12 - 1:35 am - Copyright © 2000 - 2008 runryder.com | email | link to rr | runryder needs cookie